The NEW Fluke Networks CertiFiber™ Max Optical Loss Test Set
You asked, Fluke listened. The long-awaited MPO certifier, CertiFiber™ Max, from Fluke Networks is now available to order.
Maximum fibres. Maximum efficiency. Maximum advantage.
- Speed: Measure loss, length, and polarity of up to 24 fibres in one second.
- Efficiency: CertiFiber Max is part of the modular Versiv / LinkWare cabling certification system, used by more technicians than any other certifier.
- Flexibility: Field-replaceable UniPort™ adapters connect to existing (MPO, MMC), pinned and unpinned, and future connector/pin configurations. Test 8-, 12-, 16- and 24-fiber cables, with 32-fiber cables to come.
- Accuracy: Standards-preferred one-jumper reference provides the least uncertainty in fibre measurements. Tracks time since reference setting and count of tests for TRCs to ensure compliance with test processes.
- Return On Investment: The Versiv / LinkWare ecosystem supports Tier I (OLTS) and Tier II (OTDR) fibre testing, inspection, and even copper certification.
Maximum Accuracy
With decades of experience designing the world’s most accurate calibration equipment, Fluke Networks have built the CertiFiber Max OLTS to meet the exacting measurement requirements of today’s highest-performance fibre networks.
Manufacturers and standards recommend one-jumper reference setting for the most accurate measurements, and the CertiFiber Max OLTS offers that for every cable configuration.
To reduce errors in the field, the tester includes a “Wizard” that takes the technician step-by-step through the crucial referencing process. Mistakes made in reference setting can result in the loss of an entire day’s work.
The Wizard specifies the exact accessories needed, monitors the user’s process through the steps, verifies whether measurements are within acceptable limits, allows cleaning of the end faces, and stores the critical reference values for reporting.
Results of the reference setting (including measured power and loss of the verification cords for each fibre tested) are stored and presented with project test reports, providing proof the process was done correctly.
Maximum Ease of Use.
In one second, the CertiFiber Max can test and store results for a cable with up to 24 fibres, with Versiv also cutting overhead around the test time.
Its ProjX management system means that the tester can be set up ahead of time with only the cable types, limits, and identifiers for the job, reducing confusion and mistakes.
Versiv uses a tone to indicate when the far-end tester is connected and can be set up to start tests, save results, and increment to the next cable identifier automatically, saving even more time on large projects.
Maximum Maintenance.
Maintain your new unit with Fluke’s premium care Gold Support. Offering you one free calibration per year, repairs, replacements, and 24/7 expert technical support, your products are well and truly protected.
Take the admin out of maintaining your equipment with our additional Concierge Service, so you can minimise wasted time onsite.
Our Concierge team are on hand to answer technical questions about your unit and work closely with Fluke to provide comprehensive support.
Get In Touch
