Fibre Optic Splice Closure Dome | 144 Fibre Capacity

FIBRE OPTIC SPLICE CLOSURE DOME

External dome splice closures are ideal for branch connections for up to 144 fibre terminations. They can be mounted on walls, direct-buried or on poles with resistance to UV, vibration and have a water tight seal. The enclosure is made from moulded plastic and has an IP68/9 rating. They also have an excellent temperature range of -40 degrees to +65 degrees for long term reliability. They are available with both mechanical and heat shrink sealing ports, depending on the model.

FEATURES

• Mechanical port sealing
• Base of the enclosure has 4 round cable entry points for drop cables and 1 round cable entry point for a loop cable. Once they have been opened they are sealed using mechanical sealing kits.
• Loop cable port can accept one loop cable up to 16 mm in diameter.
• Four round drop cable entry points can accept cables up to 17.5mm.
• Internal dimensions of the joint allow for safe management of unused tubes without affecting attenuation.
• Individual cable strength retention is available at each cable entry point as standard.
• Splice closure is compliant with IEC standards covering water immersion, UV resistance, salt mist, temperature cycling, fungus resistance, chemical resistance and reentry testing.
• Trays are hinged to allow access to other trays and open past 90 degrees to enable unencumbered work on installed fibres.
• No specialist tools are required to enter the enclosure and it can be locked to prevent unauthorised entry.

SUPPLIED WITH:

• Dome
• Base
• Sealing O Ring
• Mechanical Sealing Kits
• 4pc 1 Port Rubber
• 1 x 900mm Buffer Tubing
• 24 x 40mm Splice Protectors
• 12 x Cable Ties
• 1 x Abrasive Cloth
• 1 x Adhesive Tape
• 1 x Silver Heat Protection Tape
• 1 x Key for Cable Retention Bolts
• The enclosure is supplied as standard with 1 x 24 fibre splice tray and can have a further five trays added as required
• Pre-Sat Cable Cleaning Wipes
• Installation Instructions

No data sheets available.